Ramp Slope Calculator
Calculate ramp gradient from vertical rise and horizontal run.
How to Use the Ramp Slope Calculator
Enter rise and run to calculate ramp slope, gradient and approximate angle.
Practical Example
A ramp rising 0.5 m over a 6 m run has a gradient of about 8.33%.
Factors That Affect the Result
Available space, landing requirements, surface conditions, accessibility rules and measurement accuracy can affect the final ramp design.
Frequently Asked Questions
What is ramp gradient?
It is rise divided by horizontal run, usually expressed as a percentage.
Is a lower percentage gentler?
Yes. Lower gradients indicate flatter ramps.
Should I check local standards?
Yes. Accessibility and building requirements vary by location.
Related Tools
Ramp Slope Planning
Ramp slope depends on the vertical rise compared with the horizontal run. Enter both measurements in the same unit and use the result to compare possible layouts. A gentler slope requires more horizontal space, while a shorter ramp becomes steeper. Accessibility and building rules may specify maximum slopes, landings and handrails, so the calculator should be used for planning rather than final code approval. Verify the finished dimensions before construction.